10th May 2010, 14:05:38 : Dan Crump 152 Twin (May 2010)

o Manufactured by wet-lamination, press-cured under 4 Bar (hose pressure) at 95`C for 60 minutes
o Cooled under pressure to 60`C for demoulding
o Sidewall construction
o 7mm core thickness - full length core
o Full wrap single seam steel edge
o 750g Triaxial glassfibre
o Reverse inkjet printed topsheet (www.sericora.ch)
o Durasurf Tipspacers
o Hand made die-cut base (Lindsey Crump)

^ Very shiny indeed !

^ Tipspacer to sidewall joint detail

19th April 2010, 08:04:36 : JT 160 Twin (April 2010)

o Manufactured by wet-lamination, press-cured under 5 Bar (hose pressure) at 95`C for 60 minutes
o Cooled under pressure to 60`C for demoulding
o Sidewall construction
o Spruce and ash core
o 7.5mm core thickness
o Full wrap steel edge
o 20mm 80gsm UD Carbon tapes
o 750g triax glass above and below core
o Reverse inkjet printed topsheet (www.sericora.ch)
o 4000 Graphite base
o P-TEX Tipspacers

^ JT 160 twin

^ JT 160 twin

^ Charming graphic !

^ Attaching sidewalls to the core

19th April 2010, 08:04:01 : 152 Twin High Life Snowboard (with Dan Crump, February 2010)

o Manufactured by wet-lamination, press-cured under 6 Bar (hose pressure) at 95`C for 60 minutes
o Cooled under pressure to 60`C for demoulding
o Sidewall construction
o 6.5mm core thickness - full length core
o Full wrap single seam steel edge
o 750g Triaxial glassfibre + full length 25mm carbon UD strips x 2
o Reverse inkjet printed topsheet (www.sericora.ch)
o Durasurf Tipspacers
o Hand made die-cut base (Lindsey Crump)

^ Dan Crump with a 152 twin

^ Not a swastika, honest !

^ Hand made die-cut

19th April 2010, 08:04:15 : 166 Twintip Skis (with Uwe August to November 2009)

o Manufactured by wet-lamination, press-cured under 6 Bar (hose pressure) at 95`C for 60 minutes
o Cooled under pressure to 60`C for demoulding
o Sidewall construction
o Spruce and ash cores
o 11.5mm core thickness
o Partial wrap steel edge
o Triax glass above and below core
o Texalium behind digitally back-printed clear topsheet
o Durasurf Tipspacers

^ 166 twintip with a black graphic finish

^ 166 twintip with texalium finish

19th April 2010, 08:04:25 : 175 GS Skis (with Uwe August to November 2009)

o Manufactured by wet-lamination, press-cured under 6 Bar (hose pressure) at 95`C for 60 minutes
o Cooled under pressure to 60`C for demoulding
o Sidewall construction
o 17 and 27 laminate spruce and ash cores
o 10.5mm core thickness
o Partial wrap steel edge
o UD Glass, 45 degree Biax Glass, Carbon Tapes below
o UD Glass, Texalium above
o Digitally back-printed clear topsheet
o Durasurf Tipspacers

^ 2 pairs of GS skis. 27 and 17 refer to the number of laminates in the cores used. The 27 ski has a stiffer layup (more carbon and stiffer UD glass).

7th September 2008, 12:09:34 : High Life 152 Twins x 2 (September 2008)

o Manufactured by wet-lamination, press-cured under 6 Bar (hose pressure) at 108`C for 60 minutes
o Cooled under pressure to 60`C for demoulding
o Sidewall construction
o 6.5mm core thickness - full length core
o Full wrap single seam steel edge
o 750g Triaxial glassfibre + full length 25mm carbon UD strips x 2
o La-Es PBT Sublimated gloss topsheet
o Durasurf Tipspacers
o Sublimated and backscreened base graphic (snowboardmaterials.com)

NOTES

Two 152 Twintip boards designed by Dan Crump - a high school student who build the boards for his school project. We built two boards since we printed the graphics twice as a backup in case something went wrong.

^ Glueing the sidewalls to the core

^ Other Dan and his new boards...

^ One of the two 152 twins...